|
DEN810-DENT USA RECORDING POWER METER WITH WIFI AND ANTENNA
|
Allow you to download data without opening the switch or junction box cover. Any one can steal your power meter until you have this!
>> Measures, Stores and Analyzes 144 Different Electical Parameters Including Volts, Amps, Watts, Volt-Amps (VA), Volt-Amps Reactive (VAR), Kilowatts (kW), Kilowatt Hours (kHW), Power Factor and Harmonics through 63rd |
Power analysers/Power meters
|
|
|
ARH102-Smart Power Meter With Reports (WITH ETHERNET/RS-485)
|
Class 0.5 bi-directional energy and full power parameters measurement.
Block or Rolling power demand measurement.
THD, indivisual harmonics, and sag/swell power quality records.
Data logging for alarm, sag, swell events with time-stamped.
Report generation for daily and monthly power usage.
Communication interfaces:Ethernet, RS485.
Communication protocol:Modbus over TCP/IP for Ethernet, Modbus for RS485.
Smart Power Meter with up to 4 channels of re-transmission analog outputs for field integration.
12 digital inputs for power system status monitoring.
2 digital relays for kWh pulse or alarm outputs.
Automatic detection of voltage & current wiring.
Multi-language support.
|
Power analysers/Power meters
|
|
|
PRO0030-6830 All-Rounded Power and Harmonics Three and Single Phase Analyser
|
PRO0030 BASE UNIT POWER AND HARMONICS ANALYZER WITH 3 x 1000A CLAMPS Optional: PRO0041- 3 x 3000A Flexible Clamps Optional: PRO0038- 3 x 100A Clamps |
Power analysers/Power meters
|
|
|
LUT0298-COMPLETE ADVANCED SD CARD GRAPHICAL/ WAVEFORM DATALOGGING 3-PHASE POWER & HARMONICS ANALYSER W 3 X 1200A CLAMP
|
Features:
•Analysis for 3 phase multi-power system, 1P/2W, 1P/3W,3P/3W, 3P/4W •3 current probes ( CP-1201 ) are included, if change the current probes, the calibration procedures are not necessary •Current probe input signal/ranges with selection:Input signal (ACV):200 mV/300 mV/500 mV/1 V/2 V/3 VRanges (ACA) : 20 A/200 A/2000 A/30 A/300 A/ 3000 A. •Meter can cooperate the universal current probes •Measurement: V (phase-to-phase), V (phase-to-ground) A (phase-to-ground) KW / KVA / KVAR / PF (phase) KW / KVA / KVAR / PF (system) KWH / KVAH / KVARH / PFH (system) Phase angle •Harmonics display (1-50th order) •Simultaneous display of Harmonics and Wave form •Display of Waveform with Peak Values •Analysis of Total Harmonic Distortion ( THD ) •Graphic Phase diagram with 3-Phase system parameters •3 phase Voltage or Current Unbalanced Ratio ( VUR, AUR ) and Unbalanced Factor •Calculated Unbalanced Current through Neutral Line ( An )
Standard Accessories:
* Instruction manual............... 1 PC * Test Leads (TL88-4AT).......... 1 Set (4 PCs) * Alligator clips (TL88-4AC) 1 Set (4 PCs) * Clamp Probe ( CP-1201 )....... 3 PCs * AC to DC 9V adapter..............1... |
Power analysers/Power meters
|
|
|
LUT0339-COMPLETE SD CARD KWH DATALOGGING 3-PHASE POWER ANALYSER/LOGGER W 3 X 1200A CLAMP - 2 YEARS WARRANTY
|
Features:
•Analysis for 3 phase multi-power system, 1P/2W,1P/3W, 3P/3W, 3P/4W •Voltage & Current are the True RMS value. •True Power ( KW、MW、GW ) measurement. •Apparent Power ( KVA、MVA、GVA ) measurement. •Reactive Power ( KVAR MVAR、GVAR) measurement. •Watt-Hour ( WH、SH、QH、PFH ). •Power Factor( PF )、Phase Angle( Φ ). •Voltage measurement range : 10 to 600 ACV •Current measurement range: 0.2A to 1200 ACA. •Programmable CT ratio (1 to 600) and PT ratio (1 to 1000). •ACV input impedance is 10 Mega ohms. •Safety Standard : IEC 1010, CAT III 600V •Built-in clock and Calendar, real time data record with SD memory card , sampling time set from 2 to 7200 seconds. Just slot in the SD card into the computer, it can down load the all the measured value with the time information ( year/month/data/hour/mimute/second ) to the Excel directly, then user can make the further data analysis by themselves. •Measurement: * ACV * ACA * AC WATT ( True Power )AC WATT( Apparent Power )AC WATT( Reactive Power ) * Power factor * Phase angle * Frequency
Standard Accessories:
* Instruction manual.......................1 PC * Test Leads... |
Power analysers/Power meters
|
|
|
LUT0163B-Benchtop Power Meter(Watt, VA, Power factor, ACV, ACA, DCV, DCA, VAr, Whr, ohms,)
|
0.1 W resolution ( <1000 W ), high precision and high resolution in the low watt range, good performance , for low power LED lamp watt measurement
Supper large LCD, easy to read-out, display the Watt, Power factor, Voltage & Current value at the same time.
Accept different kinds current input signal as direct input, inductive clamp probe or CT ( current transformer ).
Auto range.
Built-in peak hold & data hold function.
RS-232 output interface.
Power supply by batteries or AC to DC adapter.
- See more at: http://www.test-measurement-australia.com.au/electrical/lutron-dw-6090a#sthash.oTAjYKvQ.dpuf
Multi-functions: Watt, VA, W hr, Power factor, ACV, ACA, DCV, DCA, Hz, ohm
True AC power measurement, not apparent power
True RMS for ACV and ACA
Display Watt, power factor, V and A simultaneously
Auto range, Peak-hold and Data-hold
RS-232 serial output interface
Watts (AC true power)
Direct input: 1W-100kW Current probe: 1W-2,000kW
VA(AC)
Direct input: 0.01VA-40kVA
Power Factor:
0.01-1.00
ACV/DCV
0.1V-600V
ACA/DCA
Direct input: 0.01A-20A Current probe: 1A-1000A
Watt Hour
Direct input:... |
Power analysers/Power meters
|
|
|
SEW0052B DATALOGGING HEAVY DUTY MULTI-PURPOSE SOCKET ALARM POWER METER (MAX 13A)-230V UK with Alarm/Windows Software(voltage, current, frequency, watt, power factor)
|
● Determine the running cost of your appliances.● Measure voltage, current, frequency, watt, power factor, and greenhouse gas emissions.● Optical USB to RS-232 data transmission.● 2 Optical LEDs are built-in for data transfer.● Transferring and showing real-time data to a PC.● Make informed decisions when purchasing appliances and equipment.● Reduce your electricity bill.● Calculate electrical expenses by real, hour, month. ● Can make different kinds of plugs for different countries / areas,
such as Type B, C, G, I plugs.....etc.● Data communication function.● Freely set upper and lower limit for V,A,W and
alarm when measured value is out of limit.● Backlight function. |
Socket testers
|
|
|
PRO0021-6200V3 Graphic Power Clamp for 1-,3-phase (PF,Harmoncs,KWH)
|
Analysis for Single Phase and Balanced 3 phase system
True RMS Value (V and I)
Active Power (K,KW,MW,GW)
Apparent (VA,KVA,MVA) and Reactive Power (VAR,KVAR,MVAR)
Power Factor (PF), Phase Angle( Φ )
Energy (WH,KWH,KVARH,PFH)
Programmable PT(1 to 3000)Ratios
Display of Overlapped Voltage and Current Waveform
Maximum Demand (MD in W,KW,MW) with programmable Period
Harmonic Analysis (V and I) to 50th Order
Display of 25 Harmonics in one screen
Optical Isolated RS-232C Interface
Smart Datalogging to save Battery
Datalogging of 32,64,128 or 256 points/cycles
Analysis of Total Harmonic Distortion (%THD-F)
Graphic Phasor Diagram
Capture 128 Transient Events (Time+Cycles+Faults) with Programmable Threshold(%),also can be reviewed in LCD
50000 Records with Programmable Interval (1 to 6000 seconds)
Real-time Output of Waveform, Power Parameters and Harmonics at Command
Large Dot Matrix LCD Display with Backlight
Power for Long-term Monitoring
Built -in Calendar Clock for Data Logging
General Specification:
Conductor Size
55mm(approx.), 64*24mm(bus bar)
Battery Type
Two... |
Power clamps
|
|